The Treynor, Sharpe, and Jensen ratios combine risk and return performance into a single value to measure portfolio performance. Historically, many investors mistakenly based the success of their portfolios on returns alone. Few investors considered the risk involved in achieving those returns.
But which is best? Should you use more than one or all three? Learn more about these measurements and how to use them to evaluate portfolios.
Key Takeaways
- Portfolio performance measures are a key factor in the investment decision.
- There are three popular performance measurement tools that assist with portfolio evaluations—the Treynor, Sharpe, and Jensen ratios.
- Portfolio returns are only part of the story—without evaluating risk-adjusted returns, an investor cannot possibly see the whole investment picture.
Treynor Ratio
Jack L. Treynor was the first to provide investors with a composite measure of portfolio performance that also included risk. Treynor's objective was to find a performance measure that could apply to all investors regardless of their personal risk preferences. Treynor suggested that there were really two components of risk: the risk produced by fluctuations in the stock market and the risk arising from the fluctuations of individual securities.
Treynor introduced the concept of the security market line, which defines the relationship between portfolio returns and market rates of returns whereby the slope of the line measures the relative volatility between the portfolio and the market (as represented by beta). The beta coefficient is the volatility measure of a stock portfolio to the market itself. The greater the line's slope, the better the risk-return tradeoff.
The Treynor measure, also known as the reward-to-volatility ratio, is defined as:
TreynorMeasure=βPR−RFRwhere:PR=portfolioreturnRFR=risk-freerateβ=beta
The numerator identifies excess returns (also called risk premium), and the denominator corresponds to the portfolio's sensitivity to the overall market's movements (also called the portfolio's risk). The resulting value represents the portfolio's return per unit of risk.
To illustrate, suppose that the 10-year annual return for the 500 (market portfolio) is 10% while the average annual return on Treasury bills (a good proxy for the risk-free rate) is 5%. As a reminder, a beta of one means the portfolio moves in concert with the overall market. Less than one means it is less volatile, and a beta of more than one means it is more volatile. Assume the evaluation is of three distinct portfolio managers with the following 10-year results:
| Managers | Average Annual Return | Beta |
| Manager A | 10% | 0.90 |
| Manager B | 14% | 1.03 |
| Manager C | 15% | 1.20 |
The Treynor value for each is as follows:
| Calculation | Treynor Value | |
| T(market) | (0.10-0.05)/1 | 0.05 |
| T(manager A) | (0.10-0.05)/0.90 | 0.056 |
| T(manager B) | (0.14-0.05)/1.03 | 0.087 |
| T(manager C) | (0.15-0.05)/1.20 | 0.083 |
The higher the Treynor measure, the better the portfolio. If the portfolio manager (or portfolio) is evaluated on performance alone, manager C seems to have yielded the best results (a 15% return). However, when considering the risks that each manager took to attain their respective returns, Manager B demonstrated a better outcome. In this case, all three managers performed better than the aggregate market.
Because this measure only uses systematic risk, it assumes that the investor already has an adequately diversified portfolio and, therefore, unsystematic risk (also known as diversifiable risk) is not considered. As a result, this performance measure is most applicable to investors who hold diversified portfolios.
Sharpe Ratio
The Sharpe ratio is almost identical to the Treynor measure, except that the risk measure is the standard deviation of the portfolio instead of considering only the systematic risk as represented by beta. Conceived by Bill Sharpe, this measure closely follows his work on the capital asset pricing model (CAPM) and, by extension, uses total risk to compare portfolios to the capital market line.
The Sharpe ratio is defined as:
Sharperatio=SDPR−RFRwhere:PR=portfolioreturnRFR=risk-freerateSD=standarddeviation
So, assuming that the had a standard deviation of 18% over a 10-year period, a return of 10%, and the risk-free rate of 5%, we can determine the Sharpe ratios for the following portfolio managers:
| Manager | Annual Return | Portfolio Standard Deviation |
| Manager X | 14% | 0.11 |
| Manager Y | 17% | 0.20 |
| Manager Z | 19% | 0.27 |
| S(market) | (0.10-0.05)/0.18 | 0.278 |
| S(manager X) | (0.14-0.05)/0.11 | 0.818 |
| S(manager Y) | (0.17-0.05)/0.20 | 0.600 |
| S(manager Z) | (0.19-0.05)/0.27 | 0.519 |
Again, we find that the best portfolio is not necessarily the portfolio with the highest return. Instead, a superior portfolio has the superior risk-adjusted return or, in this case, the fund headed by manager X.
Unlike the Treynor measure, the Sharpe ratio evaluates the portfolio manager on the basis of both the rate of return and diversification (it considers total portfolio risk as measured by the standard deviation in its denominator). Therefore, the Sharpe ratio is more appropriate for well-diversified portfolios because it more accurately takes into account the risks of the portfolio.
Jensen's Alpha
Similar to the previous performance measures discussed, the Jensen measure is calculated using the CAPM. Named after its creator, Michael C. Jensen, the Jensen ratio calculates the excess return that a portfolio generates over its expected return. This measure of return is also known as alpha.
The Jensen ratio measures how much of the portfolio's rate of return is attributable to the manager's ability to deliver above-average returns, adjusted for market risk. The higher the ratio, the better the risk-adjusted returns. A portfolio with a consistently positive excess return will have a positive alpha, while a portfolio with a consistently negative excess return will have a negative alpha.
The formula is broken down as follows:
Jenson’salpha=PR−CAPMwhere:PR=portfolioreturnCAPM=risk-freerate+β(returnofmarketrisk-freerateofreturn)
If we assume a risk-free rate of 5% and a market return of 10%, what is the alpha for the following funds?
| Manager | Average Annual Return | Beta |
| Manager D | 11% | 0.90 |
| Manager E | 15% | 1.10 |
| Manager F | 15% | 1.20 |
We calculate the portfolio's expected return (CAPM):
| ER(D) | 0.05 + 0.90 (0.10-0.05) | 0.0950 or 9.5% return |
| ER(E) | 0.05 + 1.10 (0.10-0.05) | 0.1050 or 10.5% return |
| ER(F) | 0.05 + 1.20 (0.10-0.05) | 0.1100 or 11% return |
We calculate the portfolio's alpha by subtracting the expected return of the portfolio from the actual return:
| Alpha D | 11%- 9.5% | 1.5% |
| Alpha E | 15%- 10.5% | 4.5% |
| Alpha F | 15%- 11% | 4.0% |
Which manager did the best? Manager E did best because although Manager F had the same annual return, it was expected that Manager E would yield a lower return because the portfolio's beta was significantly lower than that of portfolio F.
Both the rate of return and risk for securities (or portfolios) will vary by time period. The Jensen measure requires the use of a different risk-free rate of return for each time interval. To evaluate the performance of a fund manager for a five-year period using annual intervals would also require examining the fund's annual returns minus the risk-free return for each year and relating it to the annual return on the market portfolio minus the same risk-free rate.
Conversely, the Treynor and Sharpe ratios examine average returns for the total period under consideration for all variables in the formula (the portfolio, market, and risk-free asset). Similar to the Treynor measure, however, Jensen's alpha calculates risk premiums in terms of beta (systematic, undiversifiable risk) and, therefore, assumes the portfolio is already adequately diversified. As a result, this ratio is best applied to an investment such as a mutual fund.
How Do You Measure the Performance of a Portfolio?
There are several ways to measure a portfolio's performance. Some of the most popular methods are the Sharpe, Jensen, and Treynor ratios.
What Determines Portfolio Performance?
The best performance indicator measures a portfolio's returns against a benchmark and the risks. You can use only returns as a performance indicator, but this limits your view because risk is not considered.
What Is the Portfolio Performance?
Portfolio performance measures give you information about how effective your investments are.
The Bottom Line
Portfolio performance measures are a key factor in the investment decision. These tools provide the necessary information for investors to assess how effectively their money has been invested (or may be invested). Remember, portfolio returns are only part of the story. Without evaluating risk-adjusted returns, an investor cannot possibly see the whole investment picture, which may inadvertently lead to cloudeddecisions.
Article Sources
Investopedia requires writers to use primary sources to support their work. These include white papers, government data, original reporting, and interviews with industry experts. We also reference original research from other reputable publishers where appropriate. You can learn more about the standards we follow in producing accurate, unbiased content in oureditorial policy.
Michael C. Jensen. "The Performance of Mutual Funds in the Period 1945-1964."
Take the Next Step to Invest
×
The offers that appear in this table are from partnerships from which Investopedia receives compensation. This compensation may impact how and where listings appear. Investopedia does not include all offers available in the marketplace.
Partner Links
Related Terms
Information Ratio (IR): Definition, Formula, vs. Sharpe Ratio
The information ratio (IR) measures portfolio returns and indicates a portfolio manager's ability to generate excess returns relative to a given benchmark.
more
Understanding Risk-Adjusted Return and Measurement Methods
A risk-adjusted return accounts for the riskiness of an investment compared to the risk-free rate of return.
more
Treynor Index: What it Means, How it Works, Example
The Treynor Index measures a portfolio's excess return per unit of risk.
more
Treynor Ratio: What It Is, What It Shows, Formula To Calculate It
The Treynor ratio, also known as the reward-to-volatility ratio, is a performance metric for determining how much excess return was generated for each unit of risk taken on by a portfolio.
more
Sharpe Ratio: Definition, Formula, and Examples
The Sharpe ratio is used to help investors understand the return of an investment compared to its risk.
more
Excess Returns Meaning, Risk, and Formulas
Excess returns are returns achieved above and beyond the return of a proxy. Excess returns will depend on a designated investment return comparison for analysis.
more
- About Us
- Terms of Service
- Dictionary
- Editorial Policy
- Advertise
- News
- Privacy Policy
- Contact Us
- Careers
- Your Privacy Choices
- #
- A
- B
- C
- D
- E
- F
- G
- H
- I
- J
- K
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- X
- Y
- Z
Investopedia is part of the Dotdash Meredithpublishingfamily.
Please review our updatedTerms of Service.
