FAQs
Yes, it is actually possible. On the slave device, turn off DHCP and give the unit a fixed local IP address withing te normal range of the primary. Set up the WiFi passwords and off you go.
Can you use a 2nd BT Hub as a Wi-Fi extender? ›
It's extremely straightforward, just give the second hub an IP address outside of the DHCP range of the main hub, turn off DHCP on the second hub and connect the 2 LAN port to LAN port.
How do I use my BT Hub 6 as a Wi-Fi extender? ›
There are countless posts on the forum on how to do that, but to save you looking, you just give the hub6 an IP address outside of the DHCP range of the hub, turn off DHCP and connect the 2 hubs together LAN port to LAN port.
Can you link 2 BT home hubs together? ›
You can use both routers connected by an ethernet cable. To do so you will need to disable DHCP on one of them (probably the old one if the new one is to be connected to BB). You will need to decide whether you want one SSID for both or separate ones.
Can I use BT Hub as wireless router? ›
Yes, it has been described countless times on the forum.
How do I use a second router as a Wi-Fi extender? ›
Connect your old router to your main one via Ethernet and place it in AP Mode to use as a Wi-Fi extender. Switch an extra internet router into Repeating Mode to use it as a Wi-Fi repeater without a cable. Specific steps and setting names can vary from model to model depending on the router manufacturer.
How can I extend my BT WiFi signal? ›
1 Plug in the extender halfway between your hub/router and the area you wish to extend wi-fi to. 2 Give the extender 20 seconds to boot up, then the range lights will scroll up and down while it searches and connects to your router. After about 30 seconds, the flashing will stop and the signal quality will be shown.
Can I use a BT Home Hub as a wireless access point? ›
Yes, the second hub will be both an Ethernet and WiFi access point. You will need to connect your laptop directly to the second hub to make and save the changes before connecting to the main hub as both will have the same IP address until you make the changes.
How do I use my BT Smart Hub as an access point? ›
Simply give it an IP address outside of the DHCP range of the primary hub, turn off its DHCP and connect the 2 hubs LAN port to LAN port.
Can I use BT Smart Hub 2 in bridge mode? ›
Bridge mode is a feature on your BT Smart Hub 2 which allows you to use the hub as a modem only. You can set this up on your BT Smart Hub 2 or on your BT Business Hub 3/5. Why use Bridge Mode? Bridge mode lets you use your own router whilst using the BT Hub as a modem.
Yes, you can use two WiFi routers in the same house. A second router can extend your internet signal and capacity and solve many of your home WiFi issues. This includes dead zones and patchy connections. However, using two routers can lead to signal interference.
Can you use 2 smart hubs? ›
You won't be able to control the same devices using multiple hubs because devices can only be paired to one controller at a time. However, you can control multiple hubs from one account, provided each hub has its own location.
How do I bridge my BT Hub? ›
To enable bridge mode on the BT Business Hub 5, simply:
- Click on Advanced Settings.
- Enter your Admin password if prompted (can be found on the base of your Hub) and click Ok. ...
- Click Continue to Advanced Settings.
- Choose the Broadband tab, then click on the Routing tab.
- Scroll down to the bottom of the page to Bridging.
You can return your equipment for free at your nearest Post Office. Please keep your proof of postage safe, until we confirm your return. We'll send you a returns bag, but if you've ordered any new equipment, we'll send this separately.
Is the BT Home Hub a router or modem? ›
The BT Smart Hub (formerly BT Home Hub) is a family of wireless residential gateway router modems distributed by BT for use with their own products and services and those of wholesale resellers (i.e. LLUs) but not with other Internet services.
Can I use BT Smart Hub 2 as access point? ›
Re: Setting up a Smart Hub 2 as an Access Point
Simply give it an IP address outside of the DHCP range of the primary hub, turn off its DHCP and connect the 2 hubs LAN port to LAN port.
Does BT Smart Hub 2 have bridge mode? ›
Re: Smart Hub 2 and Bridge Mode
No residential BT hubs have a bridge mode. However, if you are happy to use a BT hub as the router, you can simply connect the Orbi in wireless access point mode. Turn off the WiFi on the hub if you don't want 2 networks.
Can you split BT Smart Hub 2? ›
Most new devices work well with dual-band wi-fi. But if you're having problems, you can try creating another wireless network by splitting your Hub's SSID. Please note: the Smart Hub 2 doesn't have this capability as it's designed for use with Complete Wi-Fi. The BT Smart Hub is dual band.
